HPI RACING SC-3SWP2 WATERPROOF ELECTRONIC SPEED CONTROL AND FIREBOLT 15 TURN BRUSHED MOTOR,

  • $53.00


  • The SC-3SWP2 is a powerful and durable speed controller that is fantastic for RC vehicles of all type!
  • If you've got plenty of power to strap into your RC, you can count on the SC-3SWP2 to handle it: able to handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, this speedo can handle just about anything can you fit into the chassis!


This is the HPI Sc-3sWP2 Waterproof Electronic Speed Control. FEATURES For use
with brushed motors down to 8 turns Suitable for all types of 1/10 scale
vehicles May be powered by 2-3S LiPos, or 5-9 cell NiMH NiCd batteries by
changing jumper plugs Reverse function enabled/disabled with the included
jumper plugs Fail safe protection if throttle signal is lost for more than 0.1
second Automatic throttle range calibration Low voltage cutoff Built-in
capacitors prevent signal loss from low voltage INCLUDES HPI Sc-3sWP2 ESC with
Tamiya type Battery Connector, Female Bullet Motor Connectors, On/Off Switch,
Receiver Connector and Instructions SPECIFICATIONS Forward Continuous Current:
40A Forward Burst Current: 180A Reverse Continuous Current: 20A Reverse Burst
Current: 90A Input: 2-3S LiPo, 5-9 cell NiMH/NiCd Motor Limit: 2S LiPo or 6
cell NiMH 540 or 550-size brushed motor greater than or equal to 12 turn, RPM
over 30,000 at 7.2v Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size
brushed motor greater than or equal to 18 turn, RPM over 20,000 at 7.2v
Resistance: FWD 0.002 Ohm, BWD 0.004 Ohm PWM Frequency: 1 KHz Dimensions: 1.4
x 1.2 x 0.69 (36 x 29.5 x 17.5mm) Weight: 1.44oz (41g)